ROC is a Chinese Formply production company, producing and supplying high-quality F17 templates, and is the only Formply supplier with dual certification in China. ROCPLY has both CMI's CERTMARK certification and BSI's BENCHMARK certification. ROCPLY's Formply products cover the whole range of Formply from F8 grade to F27 grade.

ROCPLY F17 Formply takes Australian construction sites and large building materials wholesalers in Australia as its main supply targets. The predecessor of ROCPLY is ROCPLEX. Since 2020, ROCPLY has been independent from ROCPLEX building templates, focusing on the development and supply of independent form brands for the Australian market. ROCPLY product engineers, in conjunction with the market research and development department and the production and operation department, have concentrated on research and development based on the actual situation of the Australian market, Make joint efforts to create the best formply brand - ROCPLY

ROCPLY Formply series is high-quality Formply, made of structural plywood, with waterproof and wear-resistant hard film finish on both sides. F17 grade is one of the most common stress grades and is an ideal material for formwork processing.

ROCPLY F17 Formply features

1. Special R&D cross structure of ROCPLY F17 Formply

The specially designed hardwood multi-layer cross structure enhances the strength and stability of the board, and is more suitable for the harsh climate in Australia. It can be easily sawed and shaped with daily tools. It is rigid, stable, light and easy to install.

ROCPLY F17 Formply is made of veneer hardwood plywood harvested from legally managed sustainable forestry plantations and is certified by FSC and PEFC.

2. Surface waterproof membrane of ROCPLY F17 Formply

The surface waterproof film of ROCPLY F17 Formply was jointly developed by ROC and Finland-China Dynan. High-quality ROCPLY-film is specially developed and designed for climate characteristics in Australia and New Zealand to provide multiple reuse of the surface. ROCPLY F17 Formply film coating is more durable and wear-resistant than ordinary coating. In addition, it can resist the alkalinity of concrete, which means that even if it is used repeatedly, it can also produce the effect of fair-faced formwork.

3. ROCPLY F17 Formply's special adhesive is designed for the climate of Australia and New Zealand

ROCPLY uses - Dynea A-bond resin adhesive specially designed for the Australian market, which can provide excellent adhesion strength and durability. This makes it very suitable for reuse in humid environments, such as concrete formwork in floors, walls, frames, bridges and other structures.

4. Four times of waterproof edge sealing of ROCPLY F17 Formply

The four edges of ROCPLY F17 Formply use four times of waterproof edge sealing to make the edges smoother and more resistant to blisters. Our production engineers have done experiments. The four times of waterproof convenient technology of ROCPLY can make ROCPLY F17 Formply soak in the pool for 120 days, and the sawn inner core is still dry without swelling. It can ensure the construction in the rainy season. At the same time, the extremely smooth edge makes the seam smaller, and the error is very small.

5. ROCPLY F17 Formply has a wide range of dimensions

ROCPLY F17 Formply plywood has conventional dimensions of 2400x1200x17mm and 2400x1200x17mm, and can also be customized according to your requirements. The maximum length range can reach 6 meters. Provide the greatest convenience for engineering formwork pavement.

ROCPLY F17 Formply has developed into a recognized manufacturer and supplier of Australian standard Formply. ROCPLY  Formply F17 is tested by Intertek and Hongjun, certified by BENCHMARK and CERTMARK, and complies with Australian standards AS 6669 and AS/NZS2269.

ROCPLY F17 Formply has high cost performance and is applicable to commercial and civil buildings.